CNC Machine Tools
1. The precision turret CNC lathe body casting is made of high-grade cast iron through resin sand casting process. It is optimized using advanced finite element analysis technology, with advanced structure and reasonable layout. After secondary aging treatment, it ensures long-term processing stability. The appearance is elegant and user-friendly.
2. Integral forming base, heavy bed body, and large span of guide rails. Dual-drive guide rails with stable structure and strong rigidity for good accuracy retention.
3. High-torque main spindle with a powerful main spindle servo motor for smooth operation, high precision, and durability.
4. Precision NSK angular contact ball bearings used in the main spindle for optimized combination of high precision, high load capacity, and high speed.
5. Bi-directional pre-stretching process significantly reduces bias torque, improves screw stress, and enhances processing accuracy.
6. Stainless steel protective cover on the front part of the Z-axis guide rail to protect it and extend its lifespan.
7. Both axes use high-precision ball screws with low thermal deformation and high transmission accuracy.
8. Precision bearings from well-known brands used for screw support and high-precision lock nuts to improve support and locking accuracy, further enhancing processing precision.
9. Automatic centralized lubrication system ensures normal precision and service life of the machine by lubricating moving parts such as screws and guide rails at set oil intervals and durations.
| Description (Description) |
unit
Unit) |
specifications
( Specification) |
process capability
(Capacit) |
Beded rotation diameter Swingover bed |
mm |
¢240 |
| Maximum machining diameter and length are Max Turningdiameter length |
mm |
¢120×100 |
| The maximum rod material processing diameter is Max bar working dia meter |
mm |
¢ 28 / ¢ 30 (optional) |
| Spindle speed: Spindlespeed (Max) |
rpm |
60 ~4500 |
| |
|
Pneumatic clamp 8000
Electric spindle hydraulic clamping 500 0
(standard configuration) |
| The spindle through-hole diameter is Spindle bore diameter |
mm |
¢36 |
a
r |
Maximum trip, Max. traverse |
X-axis (X-axis) |
mm |
280 |
| |
|
Z-axis (Z-axis) |
mm |
260 |
| Fast movement speed of Rapid traverse feed |
X-axis (X-axis) |
m/ min |
18 |
| Z-axis (Z-axis) |
m/ min |
18 |
cutter
(Tooling) |
Number of installed tool holders is Max.gang No.of tool stations |
ea |
11 |
| Odiameter shaft height OD tool height |
mm |
16× 16 |
| Inner diameter knife rod diameter is Boring bar diameter |
mm |
(Standard-equipped) ¢ 25 |
| Tool seat center height Tool holder center hei ght (Toolplte) |
mm |
35 |
| any power-generating or power-driven machine |
(Motors) |
Electric spindle motor Mainspindle motor |
kw |
5.5/7.5 |
Feed the servo motor to Servo motor |
X-axis (X-axis) |
kw |
1 |
| Z-axis (Z-axis) |
kw |
1 |
| Lubricating the pump motor, Lubricant motor |
w |
4 |
| Cooling pump motor Coolant pump |
kw |
0. 18 |
Its
he
( O t h |
Total machine tool power is Electric power sup ply |
KVA |
6 |
| Cooling box capacity of Coolanttank capacity |
L |
55 |
| Lubrication unit capacity is Lubrication tank capa city |
L |
0.8 |
| Machine tool height is Machine height |
mm |
1615 |
| |
Cfloor area Floor space |
Length of Length |
mm |
1332 |
| width Width |
mm |
1294 |
| Total weight of the machine tool is Machine weight |
kg |
1400 |
| The CNC control system, CNC controller |
standard |
Taiwans new generation |
| accuracy |
Spindle beating |
|
≤0.002 mm |
| |
X/ Z |
Axis positioning accuracy: |
|
0.003 mm |
| |
X/ Z |
Axis repeat positioning accuracy: |
|
≤± 0.002 mm |
| Description (Description) |
unit
Unit) |
specifications
( Specification) |
process capability
(Capacit) |
Beded rotation diameter Swingover bed |
mm |
¢240 |
| Maximum machining diameter and length are Max Turningdiameter length |
mm |
¢120×100 |
| The maximum rod material processing diameter is Max bar working dia meter |
mm |
¢ 28 / ¢ 30 (optional) |
| Spindle speed: Spindlespeed (Max) |
rpm |
60 ~4500 |
| |
|
Pneumatic clamp 8000
Electric spindle hydraulic clamping 500 0
(standard configuration) |
| The spindle through-hole diameter is Spindle bore diameter |
mm |
¢36 |
a
r |
Maximum trip, Max. traverse |
X-axis (X-axis) |
mm |
280 |
| |
|
Z-axis (Z-axis) |
mm |
260 |
| Fast movement speed of Rapid traverse feed |
X-axis (X-axis) |
m/ min |
18 |
| Z-axis (Z-axis) |
m/ min |
18 |
cutter
(Tooling) |
Number of installed tool holders is Max.gang No.of tool stations |
ea |
11 |
| Odiameter shaft height OD tool height |
mm |
16× 16 |
| Inner diameter knife rod diameter is Boring bar diameter |
mm |
(Standard-equipped) ¢ 25 |
| Tool seat center height Tool holder center hei ght (Toolplte) |
mm |
35 |
| any power-generating or power-driven machine |
(Motors) |
Electric spindle motor Mainspindle motor |
kw |
5.5/7.5 |
Feed the servo motor to Servo motor |
X-axis (X-axis) |
kw |
1 |
| Z-axis (Z-axis) |
kw |
1 |
| Lubricating the pump motor, Lubricant motor |
w |
4 |
| Cooling pump motor Coolant pump |
kw |
0. 18 |
Its
he
( O t h |
Total machine tool power is Electric power sup ply |
KVA |
6 |
| Cooling box capacity of Coolanttank capacity |
L |
55 |
| Lubrication unit capacity is Lubrication tank capa city |
L |
0.8 |
| Machine tool height is Machine height |
mm |
1615 |
| |
Cfloor area Floor space |
Length of Length |
mm |
1332 |
| width Width |
mm |
1294 |
| Total weight of the machine tool is Machine weight |
kg |
1400 |
| The CNC control system, CNC controller |
standard |
Taiwans new generation |
| accuracy |
Spindle beating |
|
≤0.002 mm |
| |
X/ Z |
Axis positioning accuracy: |
|
0.003 mm |
| |
X/ Z |
Axis repeat positioning accuracy: |
|
≤± 0.002 mm |
Standard configuration list
Product text description and introduction
1. High rigidity
The six basic parts of this machine tool, such as base, base, X-axis slide table, blade base bottom plate, cross slide table, etc., are selected ash cast iron H300, using resin sand process, integral casting base, through the natural aging treatment of more than a year, density 6.8-7.3g/ cm³, tensile strength σ b (MPa): 250, hardness HB209. Strength, wear resistance, heat resistance is good, the machine tool operation process can effectively absorb vibration energy, good shock absorption, and has good lubrication performance, the overall weight of the casting 1160 Kg
2. High precision
The X-axis / Z-axis rail surface is rails, which is suitable for heavy cutting; After the bed finishing, the guide surface is high frequency quenching, and the guide surface is precision ground after heat treatment. Finally, the cross-slide and X-slide contact no less than 20 points per square inch with the high-precision machining of the machine tool, and the automatic forced lubrication of all X-direction and Z-axis gauge surface can effectively prolong the life of the machine tool.
3 Functional components
- ZD-H30 adopts the original imported spindle with Taiwan customized high precision customization, the spindle adopts ultra-precision centripetal ball bearing, the large servo spindle motor drives the infinite variable speed, the highest speed is 8000 rpm, the spindle end jump and cone hole beating are within 0.002mm. After spindle assembly, the tolerance of center precision, bus and side bus on the spindle are at 0-0.003mm.
B. X axis and Z axis adopt Japanese THK ultra-precision ball wire rod, with accuracy level of C3, smooth operation, small vibration and fast shift of 18m / min;
C. X-axis and Z-axis wire rod support mode adopts the wire rod pre-stretching method " technology. The circular beat of the wire rod motor is within 0.01mm. According to ISO-230-2 standard, the positioning accuracy is within 0.003mm (full stroke), and the repeated positioning accuracy is within ± 0.002mm;
The d. X axis and Z axis coupling are SFC-040 SA2-14B-14B, with smooth transmission and high precision;
E. Using hydraulic clamping mechanism, suitable for strong processing;
f. Electrical components: AC contactor, relay and button in electrical cabinet, our company adopt Schneider / Delixi brand, leakage protection device, circuit breaker, switch power supply adopt Schneider / Delixi brand.
4. Control system
A. The system selects Taiwan new generation system, and our standard configuration includes Cs axis function;
5 · With convenient operation panel and use;
A. The operation and programming of the operators are more convenient and improve the operation efficiency;
B. Simple and generous glass door design, so that programming and operators more intuitive and clearly observe any changes in the processing process, enhance the internal visibility of the machine tool, at the same time reduce the weight of the door, small and light, reduce the physical consumption of the operators;
c. LED lighting and three-color signal lights, more energy saving and environmental protection;
D. Strong processing ability, can meet the demand of heavy cutting, compact structure, easy to operate, can realize all kinds of parts of the car circle, boring hole, drilling, tapping, car thread, cutting, cutting process, standard configuration Cs axis function, can configure all kinds of axial, radial power tool, complete more complex parts processing, greatly improving the processing performance and scope of the machine tool;
E. Machine tool reserved automatic feeder interface, through the configuration of rod conveyor or quilted manipulator, robot and other devices, can realize the shaft parts continuous, unmanned automatic processing, so that no ethics, save labor costs into reality;
F. According to customer needs and parts processing requirements, matching automatic door and oil mist collector, can be configured with automatic feeding device, rack manipulator, joint robot, etc., provide a full set of automation solutions, help customers to form unmanned automation production line, machine substitution, prompting customer manufacturing upgrade, improve customer field production automation level, help customers from labor-intensive to technology-intensive transfer upgrade;
g. According to the processing requirements of the outer diameter size of slender shaft parts, the pneumatic / hydraulic tail seat can be selected to realize one plus one top or two top type machining, and up to 3 tools can be installed through customized knife holder;
H. Rich splint options, can be customized according to the shape of all kinds of spindle spring grips, step spindle spring grips and special non-standard spindle spring grips. Rubber cylinder clamp and 4 inch / 5 inch hydraulic chuck device:
4. The following interface shall be configured at the equipment installation site:
Power interface: the power supply provided by the equipment installation site must be three-phase four-wire system, and the power line voltage is 380V. Pay attention to the power supply voltage stabilization, and ensure that the fluctuation of the power supply voltage should not be more than ± 10%. If the phase voltage of three-phase wire power supply provided by the equipment site is 380V ± 10%. When the equipment is connected to the power and electricity, do not be connected through the transformer;
2. Compressed air interface: p=4 ~6kgf / cm 2 Q = 5 m3/h, ¢ 1 2 at gas source interface, quick joint, joint to equipment, installation position, ¢ 1 2 trachea 1 2 meters for temporary adjustment on site. The main channel of compressed air must be equipped with the main channel filter and dryer. The air pressure must be guaranteed between 0.5 and 0.7 Mpa.
5. The Buyer shall leave sufficient installation space in the appearance size drawing of the equipment sample provided by the Seller for the placement and maintenance of the machine tool.
Audited Supplier 
){kind=link}