Efficient CNC Lathe with Powerful Servo Motor and High Torque Spindle
High Precision CNC Lathe with Advanced Resin Sand Cast Iron Body
Advanced CNC system: Equipped with a state - of - the - art CNC system, the lathe offers intuitive programming and precise control.
Intelligent CNC control: The intelligent control system enables automatic optimization of machining parameters for different workpieces.
Intelligent CNC control: The intelligent control system enables automatic optimization of machining parameters for different workpieces.
Gang - type tooling advantage: The unique gang - type tooling design maximizes tool utilization and reduces tool setup time.
± 10%. If the phase voltage of three-phase wire power supply provided by the equipment site is 380V ± 10%. When the equipment is connected to the power and electricity, do not be connected through the transformer;
2. Compressed air interface: p=4 ~6kgf / cm 2 Q = 5 m3/h, ¢ 1 2 at gas source interface, quick joint, joint to equipment, installation position, ¢ 1 2 trachea 1 2 meters for temporary adjustment on site. The main channel of compressed air must be equipped with the main channel filter and dryer. The air pressure must be guaranteed between 0.5 and 0.7 Mpa.
5. The Buyer shall leave sufficient installation space in the appearance size drawing of the equipment sample provided by the Seller for the placement and maintenance of the machine tool.
6. List of major parts and components
|
|
|
|
| 1 |
navar |
The new generation |
Taiwan |
| 2 |
Spindle motor |
The new generation |
Taiwan |
| 3 |
X.Z-axis servo motor |
The new generation |
Taiwan |
| 4 |
bearing |
NSK2047/2062 |
Japan |
| 5 |
ball screw |
Intime / THK |
Taiwan / Japan |
| 6 |
Straight rolling bead guide rail |
Intime / THK |
Taiwan |
| 7 |
Oil cylinder hydraulic |
Jia he |
Taiwan |
| 8 |
grease pump |
Fort teng |
Taiwan |
| 9 |
high-pressure system |
4 4 0 kg pressure, 30 L/min four-way effluent / spindle center effluent |
ZZD |
7. Factory accuracy standard
| Main inspection items |
Factory standard |
| positioning accuracy |
X-axis / Z-axis |
0.003m |
| Repeat positioning accuracy |
X axle |
±0.002m |
| Z axle |
±0.002m |
| accuracy class |
Silk rod accuracy grade |
C3 level |
| Track accuracy level |
P level |
| Spindle precision |
The cone of the clamp drum beats |
≤0.002mm |
| The spindle beats in a radial direction |
≤0.002mm |
Eight, Quilting frame automation
Audited Supplier 
){kind=link}